Whether you're an aspiring nail tech or have been in the industry for a while, you can always find new ways to better your work. Dip powder has become more popular for short nails than acrylic. It's also a go-to as it lasts longer than gel polish.

Like any other products nail techs use, dip powder brushes will need TLC or replacement. There are ways to prolong your dip powder brush and reclaim it by applying stunning colors. 

Using a dip powder brush saver can do just that. It protects the brush during and after use.

So, what is dip powder brush saver? The expert team at NotPolish explains all!

What Is Brush Saver Dip Powder?

Using this liquid product will help extend the longevity of the dip powder brush. It is used to clean them during and after application.

It’s a must-have for dip powder enthusiasts. This product saves you time and money – it extends your brush’s life and improves how well you can apply makeup.

Brushes normally become clogged when bonds or activators come in contact with sealers or basecoats. This product can solve this issue without drying out the brushes. You can perform a great dip manicure every time with the dip powder brush saver. You should also check out NotPolish for a variety of dip powders to create great looks!

What Is It Made Of?

This product usually consists of ethyl acetate and acetone. The product attaches to the bristles to create a shield between the bristles and dip powder. It helps avoid clumps and keeps the bristles from hardening. This product works well at keeping the bristles dry and avoiding absorbing any moisture from the air.

It prolongs the life of the brushes and liquids by removing resin from the bristles to prevent it from entering into the liquid. Other products may have ingredients like methyl ethyl ketone and nitroethane. 

How Does It Work?

By sealing the bristles of the brush, it prevents powder from sticking to the bristles and hardening. Using a dip powder brush saver also makes it easier to distribute the powder evenly on the brush.

This will give you a more consistent application and make your job easier. Your brushes will remain in good working condition by breaking down dip resin with this product. It also does this without drying out your bristles.

A brush saver allows for many more uses and helps avoid replacing liquids before they run out due to resin buildup. 

How Is The Brush Saver Applied?

It is fairly easy to apply a dip brush saver product. With three steps, you can keep your brushes looking and feeling new.

Following these steps will ensure your products are being used properly and no brushes are being damaged – let’s get into it.

First Step

You should first start by removing the brush saver lid and wiping down the wand and bristles using a lint-free cloth. Additionally, you will want to put aside the brush you need to clean.

As tempting as it may be, do not pull off any clumps of goop from the bristles. This can detach the bristle from the wand and damage your brush. 

You should instead use a clean, lint-free cloth to gently clean the bristles. You’ll want to be sure the want and bristles are free from any lint, fuzz, or dust particles. Using a lint-free cloth is important as you are making sure no unwanted particles are entering either bottle. 

Second Step

Place the dirty brush in the brush saver bottle after wiping it with a lint-free cloth. Give the brush saver bottle a good shake to thoroughly clean it. 

You should never use nail polish remover or other cleaning solutions to clean your brush. They have harsh ingredients that will damage the bristles and cause them to fall out over time.

They can also dry out the bristles and affect the liquids. If this happens, there is no fixing things, and you will need a new bottle. 

Third Step

For the last step, you just have to let the dirty brush sit in the brush saver bottle for about 15 minutes. Leaving it in longer will not affect it, but usually, 15 minutes is all that's needed to get your bristles gunk-free.

Once the time is up, remove it from the container and give it a good clean using a clean lint-free cloth. Doing this helps avoid any contamination from happening when using the product.

Your brush is now clean and ready to use! Using the brush saver won't damage or dry out your bristles, so you can use it before, during, or after a manicure. 

Benefits & Drawbacks Of The Dip Powder Brush Saver

A major benefit is that it dissolves any leftover residue, keeping the bristles clean and soft, and it is easy to use. You are also avoiding cross-contamination.

There are no drawbacks when it comes to using the dip powder brush saver other than the extra bucks you’ll spend on it. Its job is to keep the bristles working like new and allowing for perfect applications. 

It is an additional purchase you will have to make, but you will save money in the long run. You won't have to purchase new dip powder brushes as frequently as you would without using the dip powder brush saver.

Frequently Asked Questions

Aside from the question “What is brush saver dip powder?” you’ll likely have more regarding its use. Below, we answer a few frequently asked questions.

Can I Use Acetone Instead Of The Brush Saver?

The short answer is yes – but there is another option. Acetone can contaminate your dip liquid. However, you can use acetone to clean the neck, rim, and inside of the cap. Just be sure it does not enter the bottle. 

If you run out of the dip powder brush saver, use 91% alcohol. This is also a great way to sanitize your brushes.

If you feel your brush saver isn't working like it should, you should consider how long you have had it. Your bottle's ratio may have changed as it begins to get overloaded with resin. This makes your brush saver less potent, and you should get a fresh, new bottle.  

What Else Can I Do To Keep My Brushes Clean?

Cross-contamination between products can be a problem. Each time the bristles touch the nail, use a lint-free cloth to wipe them off. You do not have to be rough and tug on the bristles too hard. If you do, you run the issue of breaking bristles off.

Using a lint-free cloth will prevent any residue from going back into the bottle. You should also keep the rim of the bottles clean. If you want to go the extra mile to thoroughly clean your brushes, use a dip powder brush saver. This will ensure your brushes are clean and ready to be used. 

How To Prevent My Dip Liquid Bottles From Drying Out?

Your liquids will also last longer if you close them properly. Allowing access for air to enter will shorten the longevity of the product. With that being said, you do not have to seal them tight to where you struggle to open them. Leaving a millimeter or two is enough to have your bottle secured and sealed. 

You should also keep the neck, rim, and inside of the cap clean. Store your bottles in a cool, dark, and dry place to keep them upright. 

Final Thoughts

Clogged bristles will make a difference in a client's nail application and overall look. Whether you’re a professional looking to keep your clients happy and in love with their dip powder nails or an amateur nail polish enthusiast, you must take the proper steps to ensure that every nail you work with looks fabulous.

By following the steps above and keeping this information in mind, you can ensure your nail brushes always stay in good condition and ready to use. Having this brush saver in hand will allow you to clean your brushes many times before you have to replace them.

There are plenty of reasons a brush saver is convenient – and it can enhance your beauty routine significantly. If you're looking to save money in the long run and get the most use out of the range of products at NotPolish, consider a dip powder brush saver!